|Grade||Genuine Rolex||AAAAA Clone||AAA Replica||A Replica|
|Movement||Rolex Calibre 4130||Genuine Swiss Clone 4130 movement||Swiss 7750 Movement||Asian MingZhu Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
|Dial Color||Gray Dial|
|Engine||Rolex Calibre 4130/7750/Mingzhu Engine|
Band Material: 316L. The band is made of 316L steel, the hardest material, which is a very strong and corrosion-resistant steel. It has the same strength as the most popular grades (HRC52, HRC55), but only half the weight. Compared with competitors, the production cost of stainless steel is also higher.
Watch Case: 316L. The case is made of 316L stainless steel, the hardest material, which is a medium-to-high-end case material. Because it contains molybdenum, it is more wear-resistant than 304, and the grade is also high.
Case Back: Solid. In the world of watches, a sturdy back cover is very important, and the water resistance will be better than a transparent one. A waterproof sealing ring is added to the through-bottom watch, which makes it difficult to seal.
Crystal: Sapphire Crystal. Sapphire crystal is a good choice, because sapphire has higher impact resistance, air tightness and hardness than other materials, and the processing cost is also high, so it is mostly used in top watch brands. Tips: The A Replica is applied with mineral glass instead of sapphire.
Hand: Silver-tone. For the replica watch, we apply with hands of silver-tone, which is delicated and cool.
Second Markers: Minute Markers around the outer rim. The design of other marks in watches, also known as clock hands, this design element has been used in many well-known designs.
Dial Markers: Luminous Index. The luminous sticks in the watch is used in many devices to display the time in dark places. These sticks can actually be used to represent time. After turning on the power, you can find the time with a single tap.
Luminiscence: Hands and Markers. Regarding this watch, luminescence is hands and markers. With this watch, you will not lose your time in dark.
Bezel Material: Stainless Steel. The stainless steel bezel is an endurable material that can be used for dials and watch faces. It’s extremely resistant and flexible. Learn to design a gorgeous hand-made stainless steel bezel and how one can use it to create a luxury watch.
Clasp: Fold Over Clasp. The clasp of the watch to make it easier and faster for the user to open and fold the watch case to keep it secure.
Water Resistance: 30 meters. The watch we use a waterproof at 30 meters. But please make sure you close the crown properly. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
1:1 Clone, A Replica, AAA Replica, AAAAA Clone, Top 1:1 Clone